MENU

Technology & Trends
Category

WLtoys V977 Power Star X1 RC Helicopter

Technology & Trends

July 29, 2017

Flybarless CP helicopter, aerodynamically designed to attain unparalleled stability Brushless out runner (1106) engine

3D Mode activates 3-axis gyro, empowers aerobatics such as springs, rolls inverted flight, funnels and tick-tocks

1 * Placing Tool

Bundle weight: 1064g / 2.3pounds

Bundle dimensions: 27 * 27 * 11cm / 10.6 * 10.6 * 4.3in

Regular (aka 6G) triggers 6-axis gyro, enables stable flight, appropriate for novices

Transmitter can change from Mode 1 to Mode 2, vise versa.

The package arrived with just 1 450mAh 1S 3.7V battery.  It’s level and long, which reminds me of Wrigley’s chewing gum.  I managed to fly V977 together with my Solo Pro 100 batteries (Nine Eagles, want to swap polarity!)  Which I purchased for the quads

Transmitter has 3D aka Idle-Up change, Throttle Hold switch, big LCD, very low voltage warning. Hovering midpoint setting permits setting of this hovering point.

I cannot tell if the 2mm square tail boom is glued to the frame.  There aren’t any screws protruding that the boom set up.  Sturdy is felt by the thrive

1 * Manual

Battery: 3.7V 450mAh 25C(Contains)

USB charger two at a time

Bundle list:

I discovered that adding the initial battery wltoys v977 completely will change the middle of gravity forward.  Apparently, the battery has been too thick to be completely inserted to the longer tail boom (instead of the brushed V966).  The front was thick due?

Flying weight: 48.5gram; Flight period: 5-7 mins

Rather than three linear servos, you will find 3 WLtoys Helicopter rotary servos.  I really don’t believe servos hindered the helicopter operation, so I would say using rotary servos might not be a functionality update.  On the other hand, cleaning is not required by rotary servos.  However, the issue is that they have a tendency toward striping.  Luckily, there are methods to protect against striping that the servos at a wreck (see what people do to their Walker Super CP).

The SP100 battery matches “fine” but can come loose through tick-tocks.  It was a catastrophe.  Its flight period is roughly half of the battery as its capability is 300mAh.

Weight: 48.5gram

In Idle-Up, 50% collective, the swash plate seems to be flat.  The servo arms aren’t.  I’d really like to rectify that from the transmitter doesn’t permit station sub trims.  Front servo is from place (seated a small forwards) as you are able to understand that the linkage rod melts backwards.

Flight time: Around 5-7 minutes

Read article

Hubsan X4 H107c RC Quadcopter with 2MP Camera

Technology & Trends

July 29, 2017

4 x blades

With 4 stations and USB cable layout

Here is a great miniature Drone.  The hubsan-x4-h107c-hd is a good choice for novices looking for a miniature drone using a camera.  It is cheap and offers features found in costlier and larger versions.  It fast and a blast to fly.

1 x charging cable

6-axis flight management system

USB charging cable enables to control it by pc

The X4 gets the ability and responsiveness to meet your abilities as you develop into a quad-rotor ace.   Complex circuitry gyros, and accelerometers provide stability to the Hubsan X4 H107c rc quadcopter with camera.  Every time you power-on the X4, its software calibrates the version for flight.

Switching between Professional and Standard mode is as simple pressing the ideal control stick.  A bright LED light offers information indicating Regular and status or Professional mode.  Trim adjustments are simple and fast due to digital adjustment buttons and its LCD display.

4-ways reverse (left, right, forward, backward)

The miniature size makes it pocket-portable for indoor trip almost everywhere, however its quad-rotor push makes it strong enough to fly out.  Blue LED lights built into also the LiPo battery that is added, and also the body light the way provides lots of power and recharges.

Exhilarating Interesting Aerobatics X4’s large push, slim down, and exceptionally responsive controls enable you to perform incredible stunts with only a flick of those sticks.  The X4 snaps right into backward and forward rolls with lightning pace.  Turns can be even made by the X4!  Take your hands and also also the X4 contributes to a stable and strong hover.

The Hubsan X4 H107c is totally ready-to-fly, The 2.4GHz Transmitter carries a complete complement of renaming attributes.  Every time X4 and the transmitter are powered on, the transmitter binds to the helicopter.

1 x battery

Read article

Like Archery? Compound Bows are Great As well

Technology & Trends

July 7, 2017

If you like archery for sport or for hunting, you might have used traditional bows. But have you tried archery and compound bows?

Compound bows use cables and a system of pulleys to pull back its bowstring. It is constructed to help achieve a faster and more forceful shot.

Anatomy of The Compound Bow

Compound bows have limbs. They serve a as a bridge to store the energy when you pull back on an arrow and also help transfer the force to the string, then to the arrow.

There is also the riser, which is commonly made from machined aluminum. This is the central part of the bow and where the limbs are attached to.

Compound bows also have several types of cams serving as a pulley system. There are different types of cams but it basically transfers forces from your body to the limbs then to the arrow.

Of course, there is the bow string, cables, and other parts such as cable guard, cable slide, peep sight, sight, vibrator arrester, stabilizer, wrist sling, among others.

If you are tired of your old bow and want to give compound bows a try, below is a quick guide on how to choose one.

Eye dominance

Before even thinking of archery and compound bows, you first need to know what’s your dominant eyes. You basically want to know whether input from the right or is more accurate than the left eye’s and vice versa.

Normally, your dominant eye will be on the same side as your dominant hand. However, it is not uncommon to see some switch hitting or cross dominance.

Draw Length

You need to know what’s your draw length. You can go to an archery store and have it measured if you don’t want to the trouble of doing it on your own.

If you want to estimate your draw length, just measure your wingspan. Measure it from one middle finger to another and divide whatever you’ll get with 2.5. That’s a good estimate of your draw length.

Axle To Axle Length

Don’t think of car axles when you talk about axle of compound bows. Axles on bows help power the arrow and they are the wheel-like like structures you’ll find on the bow.

The axle to axle length is important because it helps determine how the size of your bow so it will fit the kind of hunting or shooting you intend to do. If you get a long compound bow, it will be difficult for you to position yourself or move around while hunting or shooting.

Draw Weight

Draw weight is how much you pull back with your compound bow. There is really no equation to know this bu what’s usually done is you start low and eventually adjust as needed. As your archery skills advance and as your muscles get used to the workload, the heavier you will be able to pull. Today, you can easily find compound bows that come with adjustable draw length and draw weight.

When you try archery and compound bows, don’t worry if you do not hit the target the first time. Make adjustments and make sure you practice on a regular basis.

Bored with the traditional bow and want to try archery and compound bows? Learn more how is it different from traditional bows at TacticalPeak.com.

Read article

Things You Won’t Like About Web Design Company and Things You Will

Technology & Trends

July 4, 2016

Web Design Company Options

Should you be going for a business that will design your site, here are a couple of questions which you might be asked by a great web design company. At any time you choose an internet design firm, observe the provider’s own site. Yes, it appears to be obvious that web design company should have own site with portfolio of earlier works. Therefore it is very vital that you should be aware of what your web business is speaking about and doing when you’re thinking to employ web design company.

The Web Design Company Pitfall

The above are some of the fundamental strategies to pick out an excellent web design company. You are required to have an internet design business that is well experienced in making business website designs. An expert web design company is your final web solution for these reasons. The task of determining the best ecommerce web site design company isn’t any simple job.

Web design is just a field where you need to impress the user at first. There are numerous advantages of procuring a web design business to create for your websites. Choose the best web design business is crucial for your own small organization. There are several factors that can help you to pick the best web design company for your site.

Read article

146

Types of Galvanizing Treatments

Magazines, Technology & Trends

April 24, 2016

Galvanizing is becoming a more and more common treatment nowadays as people start to realize the benefits using this technique could bring. There are various strategies for applying zinc coatings and every will decide the covering’s thickness and its definitive strength in a particular situations The most generally experienced sorts of zinc coatings are zinc electroplating, mechanical plating, continuously stirred sheet, continuously stirred wire, galvanized pipe and tube, general or hot plunge stirring, as well as zinc metal showering. Zinc electroplating includes submersion of the things to be covered in an answer containing zinc particles and applying an electric current to consistently coat the surface.

Understanding Types of Galvanizing Treatments

Zinc electroplated coatings are splendid coatings that are dainty, normally around five to ten microns and are not suitable for outside use where sturdiness is required. Substantial chromate coatings are much of the time connected to zinc plating to enhance their strength, particularly for applications. The covering is all immaculate zinc and does not have the hard amalgam layers of the hot plunged coatings. Mechanical plating includes tumbling the things to be covered in zinc powder with glass dots and unique diminishing operators to bond the zinc particles to the steel surface.

The mechanical plating procedure is utilized to apply zinc or amalgam coatings to latches and little parts. The zinc particles are in lamellar structure and strength identical to hot plunge coatings can be accomplished in a uniform covering that is especially suited to strong latches and solidified sort screws that are unsatisfactory for hot plunge stirring. These coatings are ordinarily fifteen to twenty microns thick. All in all, although galvanized products are very common nowadays, make sure that you choose the right supplier for them. For example, if you need a galvanized key clamp, make sure to seek out dependable suppliers so that your product would be guaranteed.

Read article