Flybarless CP helicopter, aerodynamically designed to attain unparalleled stability Brushless out runner (1106) engine
3D Mode activates 3-axis gyro, empowers aerobatics such as springs, rolls inverted flight, funnels and tick-tocks
1 * Placing Tool
Bundle weight: 1064g / 2.3pounds
Bundle dimensions: 27 * 27 * 11cm / 10.6 * 10.6 * 4.3in
Regular (aka 6G) triggers 6-axis gyro, enables stable flight, appropriate for novices
Transmitter can change from Mode 1 to Mode 2, vise versa.
The package arrived with just 1 450mAh 1S 3.7V battery. It’s level and long, which reminds me of Wrigley’s chewing gum. I managed to fly V977 together with my Solo Pro 100 batteries (Nine Eagles, want to swap polarity!) Which I purchased for the quads
Transmitter has 3D aka Idle-Up change, Throttle Hold switch, big LCD, very low voltage warning. Hovering midpoint setting permits setting of this hovering point.
I cannot tell if the 2mm square tail boom is glued to the frame. There aren’t any screws protruding that the boom set up. Sturdy is felt by the thrive
1 * Manual
Battery: 3.7V 450mAh 25C(Contains)
USB charger two at a time
I discovered that adding the initial battery wltoys v977 completely will change the middle of gravity forward. Apparently, the battery has been too thick to be completely inserted to the longer tail boom (instead of the brushed V966). The front was thick due?
Flying weight: 48.5gram; Flight period: 5-7 mins
Rather than three linear servos, you will find 3 WLtoys Helicopter rotary servos. I really don’t believe servos hindered the helicopter operation, so I would say using rotary servos might not be a functionality update. On the other hand, cleaning is not required by rotary servos. However, the issue is that they have a tendency toward striping. Luckily, there are methods to protect against striping that the servos at a wreck (see what people do to their Walker Super CP).
The SP100 battery matches “fine” but can come loose through tick-tocks. It was a catastrophe. Its flight period is roughly half of the battery as its capability is 300mAh.
In Idle-Up, 50% collective, the swash plate seems to be flat. The servo arms aren’t. I’d really like to rectify that from the transmitter doesn’t permit station sub trims. Front servo is from place (seated a small forwards) as you are able to understand that the linkage rod melts backwards.
Flight time: Around 5-7 minutes